Copyright © Ganterud Lifting Solutions AB | www.ganterud.se | [email protected]
13
3.3 Remote control.
The lifting yoke is equipped with radio control and is controlled by the supplied remote
control.
The remote control is calibrated for the lifting yoke, using a specific radio frequency.
This means that several lifting yokes can be used with their own remote controls on the
same work site, without disrupting each other.
If several remote controls are used on the same work site, and for some reason are
using the same radio frequency, there is a risk of them disrupting each other. In this
case, it is necessary to change the radio frequency of the affected remote controls and
receivers.
Changing the radio frequency may only be performed by authorised personnel.
3.4 Intended use
Ganterud L3: The lifting yoke is intended for lifting objects with a maximum weight
of 3 tonnes, as well as for levelling where the maximum imbalance between the
attachments is 500 kg.
The lifting yoke is intended for lifting with a maximum chain angle of 60°.
The lifting yoke can be used both indoors and outdoors, within a temperature range of
-20°C to +40°C.
3.5 Disposal
Disposal must take place in accordance with local rules and regulations.
