Copyright © Ganterud Lifting Solutions AB | www.ganterud.se | [email protected]
14
4 Operation
Each and every one of the checkpoints below
must be approved before the GANTERUD L3 is
used.
4.1.1 Before use
CHECK:
• that the batteries in the lifting yoke are
fully charged
• whether the batteries in the remote
control need to be replaced
• that the main power switch is set to the
On position
• that no mechanical damage is present on
the product
• that no mechanical obstacles are present
on and around the chain
• that no damage is present on the chain,
the entire chain must be inspected
• that the chain and lifting hooks are intact
and clean
• that the locking mechanisms on the lifting
hooks are working
• that the decals are clearly legible
4.1.2 After use
CHECK:
• whether the batteries in the lifting yoke
need to be charged
• whether the batteries in the remote
control need to be replaced
• that the main power switch is set to the
Off position
• that no mechanical damage is present on
the product
• that no mechanical obstacles are present
on and around the chain
• that no damage is present on the chain,
the entire chain must be inspected
• that the chain and lifting hooks are intact
and clean
• that the locking mechanisms on the lifting
hooks are working
• that the decals are clearly legible
4.1 Daily inspection
