Copyright © Ganterud Lifting Solutions AB | www.ganterud.se | [email protected]
20
6 Maintenance
6.1 Charging the batteries in the lifting yoke
6.2 Replacing batteries in the remote control
• Always decouple the lifting yoke from the
crane or other lifting device, and place it on
the ground before commencing maintenance
work. The lifting yoke must be placed on a
firm surface with access to good lighting.
The batteries may only be charged in a well ventilated area. Make sure that the lifting
yoke is turned off with the main power switch before commencing charging.
The remote control is powered by 3 AAA batteries.
First turn the power switch on the back of the remote control to the Off position, and
then remove the back of the remote control to access the batteries. Replace the old
batteries with new batteries and reassemble the remote control. Recycle the old
batteries in accordance with local rules and regulations.
• Always remove the key for the main power
switch before commencing maintenance
work.
