Copyright © Ganterud Lifting Solutions AB | www.ganterud.se | [email protected]
21
6.4 Storage and transport
6.5 Cleaning
6.6 Inspection
The GANTERUD L3 must be stored and
transported in the original packaging. The lifting
yoke must be stored indoors/protected from the
weather and with charged batteries. If the lifting
yoke is to be stored for longer than 3 months, the
batteries must be connected to trickle charge so
that there is no risk of them losing capacity.
In this case, storage may take place at a minimum
of -20°C. If this is not possible, the batteries must
be removed and stored indoors in an environment
that satisfies these requirements.
• GANTERUD L3 – the lifting yoke is not required to be inspected by a third party.
• Visual inspection may be carried out by an inspector designated at the work site.
• Make a note when the inspection has been performed.
• The lifting yoke must be inspected annually by a service partner that we have
approved, and if necessary serviced.
• Contact Ganterud Lifting Solutions AB for more information.
• The lifting yoke must not be cleaned with a
pressure washer.
• A hose pipe and a sponge are
recommended.
• Never flush up under the plate over the
chain wheel.
