G&D TradeSwitch2-USB, Руководство по сборке, установке и эксплуатации

Страница: 52 / 88

Installation
5 · G&D TradeSwitch2-USB
Connecting the console devices
Keyb.: Plug the connection cable of the USB keyboard in this interface.
Mouse: Plug the connection cable of the USB mouse in this interface.
Line In: If desired, connect a microphone or a headset to this interface.
Speaker: Connect the speakers to this interface for output of audio signals at the
active computer.
USB 2.0 Devices: If you want USB devices to be available to the connected computers
(e.g. a printer or a mass storage device), connect these devices to the interfaces on
the front panel (see figure on page 4).
ADVICE: Connect the cables of the console and the computers preferably block by
block and from the bottom up. By doing so, you will avoid already connected
cables blocking your view of the interfaces.
Figure 2: Interfaces to connect the console devices
NOTE: You can also connect both input devices to the USB 2.0 Devices interfaces on
the front panel of the device.
In this case, switching of the channels is not possible via keyboard.
LED Out 1 LED Out 2
CPU 1 CPU 2
USB 2.0 Line In Line Out USB 2.0 Line In Line Out
Po
wer
Keyb./Mouse Line In Speaker
Console