G&D TradeSwitch2-USB, Руководство по сборке, установке и эксплуатации

Страница: 68 / 88

Configuration
21 · G&D TradeSwitch2-USB
Changing the double hotkey
If the use of double hotkeys is enabled (see page 19), press the double hotkey and the
Backspace key simultaneously to start the setup mode of the KVM switch. Switching
of channels takes place by pressing the double hotkey and a select key at the same
time.
If an application program or another G&D device uses the same hotkey within the
cascade, the hotkey can be changed.
How to change the current double hotkey:
Setup
Mode
1. Requirement: enabled double hotkeys (see page 19).
2. Press Double Backspace (default: Alt Gr+Ctrl+Backspace ) to enable the
setup mode.
If the hotkey delay is active, press the key combination for seven seconds .
3. Press one of the setup keys listed below to activate the desired double hotkey:
Alt Gr  Enables Alt Gr+Ctrl double hotkey
Win  Enables Win+Ctrl double hotkey
Shift  Enables Shift+Win double hotkey
Ctrl  Enables Ctrl+Shift double hotkey
Alt  Enables Alt+Shift double hotkey
Setup Men
u 1.
Requirement:
active double hotkeys (see page 19).
2. Use the terminal emulator to establish a connection to the KVM switch.
3. Use the
Arrow 
or
Arrow 
keys to select the
Hotkey
row.
4. Press the
Space
key (repeatedly) to enable the desired double hotkey:
Alt Gr+Ctrl
 Enables
Alt Gr+Ctrl
double hotkey
Win+Ctrl
 Enables
Win+Ctrl
double hotkey
Shift+Win
 Enables
Shift+Win
double hotkey
Ctrl+Shift
 Enables
Ctrl+Shift
double hotkey
Alt+Shift
 Enables
Alt+Shift
double hotkey
5. Press the
S
key to save your settings.