G&D DP1.2-MUX2-NT, Инструкция по установке и эксплуатации

Страница: 61 / 76

Further information
G&D DP1.2-MUX2-NT · 20
English
Further information
Pin assignment of the RS232 socket
The devices of the DP1.2-MUX2-NT series provide an RS232 socket.
The following figures shows the pin assignments of the RS232 socket:
The table shows how the different conduits of the data connection are assigned to
the according pins:
Pin no. Conduit
1 not occupied
2 RxD (Receive Data)
3 TxD (Transmit Data)
4 not occupied
5 GND (Ground)
6 not occupied
7 RTS (Request to Send)
8 CTS (Clear to Send)
9 +5V DC, max. 100 mA ( necessarily see advices below! )
IMPORTANT: Please mind the following recommendations when connecting the
KVM switch to serial device to avoid damages at the devices.
 Unused contacts should be left unconnected when connecting the KVM switch
to the serial device.
 Only connect pin 9, if the serial device is to be supplied with power
(+5V DC, max. 100 mA) via the RS 232 interface!
1 2 4 5
8 6 7 9
3