G&D DP1.2-MUX2-NT, Инструкция по установке и эксплуатации

Страница: 58 / 76

Initial configuration of the network settings
17 · G&D DP1.2-MUX2-NT
3. Click on Login .
4. Click on the Config Panel 21 icon.
Configuring the network interfaces
How to configure the settings of a network interface:
1. In the menu, click on
KVM switches
.
2. Click on the device you want to configure and then click on
Configuration
.
3. Click on the tab
Network
.
4. Select the section
Interfaces
.
5. Enter the following values under
Interface A
or
Interface B
:
IMPORTANT: The operation of both network interfaces within one subnet is not
permitted.
NOTE: The
Link Local
address space 169.254.0.0.0/16 is reserved for internal com-
munication between devices according to RFC 3330. It is not possible to assign an
IP address of this address space!
Operating mode Select the operating mode of Interface A or Interface B :
 Off:
Switch off network interface.

Static: A static IP address is assigned.
 DHCP:
Obtain IP address from a DHCP server.
IP address: Only if the Static operating mode is selected, enter the IP
address of the interface.
Netmask Only if the Static operating mode is selected, enter the net-
mask of the network.
The drop-down list shows the text
Link aggregation active
if the interface has
been added to a network interface group.
In this case, configure the network interfaces in the »Link aggregation«
section.