G&D DP1.2-MUX2-NT, Инструкция по установке и эксплуатации

Страница: 44 / 76

The KVM switch
3 · G&D DP1.2-MUX2-NT
The KVM switch
The KVM switch DP1.2-MUX2-NT lets users operate up to two computers from one
workstation.
The workstation is equipped with a keyboard and mouse as well as a DisplayPort™
monitor. The computers connected to the KVM switch are operated centrally at the
workstation.
Switching to one of the computers connected to the KVM switch can also be carried
out via

the buttons on the device,

configured
select keys
,

configured
step keys
,

a serial device,

the web application
Config Panel

the switching tool
EasyControl
,

XML control,

or SNMP.
Two USB 3.0 interfaces are available on the front of the device for operating any
USB device. The connected USB devices are available at the active computer.
Scope of delivery
 1 × KVM switch DP1.2-MUX2-NT
 1 × data cable ( USB-Service-2 )
 1 × power cable
 1 × rack mount set
 1 × manual »Installation and Operation Guide«
 1 × manual »Web application Config Panel «
NOTE: You can connect computers with up to two video outputs to the MC2 vari-
ant of the KVM switch. The video signals from these computers are displayed on
two separate monitors at the workstation.
NOTE: The KVM switch works with full keyboard and mouse emulation on each
channel and guarantees error-free booting of the connected computers at all times.
IMPORTANT: Each computer you want to connect requires an individual KVM
cable set.