G&D DP1.2-MUX2-NT, Инструкция по установке и эксплуатации

Страница: 54 / 76

Advanced options to switch between channels
13 · G&D DP1.2-MUX2-NT
The KVM switch confirms the correct execution of the command with a message. A
message also informs you if the switching has failed.
Switching via web application
Switching to one of the computers connected to the KVM switch can be carried out
via the web application Config Panel.
Detailed information on this topic are given in the separate manual for operating the
web application.
Switching via switching tool
Switching to one of the computers connected to the KVM switch can be carried out
via the switching tool
EasyControl.
Detailed information on this topic are given in the separate manual for operating the
web application.
Switching via SNMP
How to switch the signal transmission via SNMP:

Use the SNMP management station to set the
managed object selectedChannel
to the
number of the channel you want to access.
Message Meaning
In
[x]
All Successful switching to channel
[x]
E01 Invalid channel number (out of range)
E06 Switching between channels failed
E10 Invalid command
E13 Invalid value (out of range)