TSP & Remote TSP Controller Users Manual
13
TSP Configuration (Config) Menu
The configuration menu applies to the hardware settings of the TSP(s) attached to the Remote TSP Controller.
Upon entering this screen, the Remote TSP controller can automatically scan the available hardware and
determine the configuration automatically by pressing the Re-Scan button. The configuration detected can be
manually overwritten.
Re-Scan
The Re-Scan button initiates a scan of the TSP hardware and automatically sets the TSP Configuration selected
based on the hardware detected. In the event that a scan does not select the appropriate TSP Configuration,
manually enter the desired configuration using the TSP Configuration pull down menu.
Note
: Re-Scanning will activate all installed filaments.
TSP Configuration
The TSP configuration pull down menu allows the current number of TSPs (1 or 2) and the current number of
filaments (3 or 4) to be viewed and selected when automatically scanned or manually overwritten.
