Galvanic Applied Sciences MONITEK MESSENGER, Руководство пользователя

Страница: 66 / 87

-64-
6.6.4.3 Assign Digital Inputs
• Choose Cleaning Event 1…2
•
Set Cleaning Frequency in Hours = 0
•
Specify the Cycle Duration , and Purge Time. Save the settings. Activate the
Relay through Assign Digital Inputs. The Cleaning Cycle gets activated ONLY
ONCE.
Note: Whenever you are trying to activate a Cleaning Event through Assign
Digital Inputs make sure that the Cleaning Frequency in Hours is 0.
Failing to do so may cause malfunctioning of the Cleaning Event.
6.6.4.4 Set Alarms
You can setup Alarm set conditions. Each Alarm can have a HYSTERESIS and a
TIME DELAY (the condition must be met for at least this time before the alarm is
reported). The alarm mode (LOW, HIGH, LOW LATCH, HIGH LATCH) can be
selected per individual Alarm.
Alarms can be assigned to the following signals

Result1

Result2

Result3

Result4

Ambient Temp

General Alarm
The different Alarm Types are

Low

Low Latch

High

High Latch
Choose on the Alarm (1- 4) .
Specify the signal to which the Alarm needs to be assigned by Choosing on the
Assigned Signal Toggle Button.