Galvanic Applied Sciences MONITEK MESSENGER, Руководство пользователя

Страница: 39 / 87

-37-
Are you sure you want to clear all
stored Results "PREVIOUS DATA" of ALL Results will
be cleared
Port not available
The Selected Comport (RS-232 / RS-485)
is used by another Application
Overflow! Reduce gain? If you try to auto-set the gain, the signal
has to be in range. If gain is already high,
it has to be reduced to fit signal to range.
Fill blank fields! Entered data contain NULL values
Please go online
Connect to Messenger Device
Entered code is not correct. Entered Access Code doesn't match
Unit ID must be an integer between
0 and 255.
Entered Unit ID value is out of range
Invalid Data
Entered Data is Not Valid Ex: - characters
entered instead of Numeric value
Are you sure you want to exit this
program?
Exits the Application
NO RESPONSE: Please check
device ID# or run the search
function Currently no Device exists in the Network
with the specified ID. Navigate to Select
Messenger and Run the Search Function
which gives the List of Devices present in
the Network
Changing language requires
closing of the program. Are you
sure? Switching to a different Language
requires restarting the Application.
All data in the Messenger will be
overwritten with data from this
device. Are you sure? Loading the parameters from .pda file will
cause ALL the current parameters to be
Overwritten.
Access codes cannot be modified
in OFFLINE mode
To modify the Access codes switch to
ONLINE mode.