Galvanic Applied Sciences MONITEK MESSENGER, Руководство пользователя

Страница: 9 / 87

-7-
THE SYSTEM REQUIRES AN AC-GROUND (EARTH
GROUND) AND ALL SENSORS CONNECTED TO THE
TRANSMITTER MUST BE GROUNDED.
•
Do not operate with open enclosure. Exposed electronics will promote
the risk of electrical shock and might cause damage to the unit.
•
Do not alter cable length. The instrument was calibrated with a
specified cable length. Altering cable length can cause unstable
signals and void instrument calibration.
•
Keep original packing materials. Ship the instrument in the original
packing material to avoid damage to the sensor or transmitter. If
packing material is needed, contact Monitek.
•
Mishandling of the sensor is not covered under warranty. Do not
disconnect the interior wiring of the sensor.
1.3 Device Installation
1.3.1 Transmitter location, specifications and installation.
The transmitter should be installed using the mounting ears in a
vertical position. The transmitter should not be installed in direct
sunlight, as this will tend to cause abnormally high heat inside the
enclosure, also avoid locations that are close to excessive heat
generating equipment.