Revision 4
103
August 02, 2019
12.2 The Status Tab
12.2.1 Information on the Status Tab
The
Status
tab (Figure 12-1) presents information about the analog and digital inputs and
outputs of the analyzer. These parameters are provided for reference and cannot be edited
on this tab. Analog Outputs, Relay and Solenoid status can be edited and on the
Manual
Override
tab (Section 12.3).
Figure 12-1: The Status Tab
The
Online
LED is green if the system is on-line and red if the system is off-line. The
Relays,
Solenoids and Digital Inputs
LEDs are red if the function is active and gray if the function is
not active.
The
On Board Temperature
field provides the temperature of the peripheral board and is an
indication of temperature inside the analyzer cabinet.
The
Analog Inputs
box shows the current value of each of the four analog inputs in their
calibrated units.
The
Calculated Analog Outputs
box shows the theoretical value of each of the four analog
outputs.
The
Relays Test
box shows the status of each of the 4 relay outputs.
The
Solenoids Test
box shows the status of each of the 4 solenoid valve outputs.
Содержание 943-TGX
