Galeo PC78MR-6, Руководство по эксплуатации и техническому обслуживанию

Страница: 36 / 295

.
SAFETY
SAFETY MACHINE OPERATION
SAFETY MACHINE OPERATION
STARTING ENGINE
If there is a warning tag hanging from the work equipment control
lever, do not start the engine or touch the levers .
CHECKS BEFORE STARTING ENGINE
Carry out the following checks before starting the engine at the beginning of the day's work.
Remove all dirt from the surface of the window glass to ensure a good view.
Remove all dirt from the surface of the lens of the working lamps, and check that they light up correctly.
Check the coolant level, fuel level, and oil level in engine oil pan, check for clogging of the air cleaner, and check
for damage to the electric wiring.
Adjust the operator's seat to a position where it is easy to carry out operations, and check that there is no damage
or wear to the seat belt or mounting clamps.
Check that the gauges work properly, check the angle of the lights and working lamps, and check that the control
levers are all at the neutral position.
Before starting the engine, check that the lock lever is at the LOCK position.
Adjust the angle of the rearview mirror so that viewed from the operator's seat, the rear lower part of the machine
(whose view is usually blocked by the engine hood) can be clearly seen. For this adjustment, see the section of
"Rearview Mirrors (PAGE 3-66)" in this manual.
Check that there are no persons or obstacles above, below, or in the area around the machine.
2 - 21