Galcon Gal Pro DC, Руководство по эксплуатации

Страница: 31 / 44

1
Gal Pro
Instruction 1.0
Sequence Status
This menu shows the current status of the sequences.
Subject Example Explanation
Sequence
Number 1 The sequence to which the parameters are related. Change the
sequence number by the Next and Prev keys.
Irrigat The current sequence status. The options are: "N.Activ", "Def
Err", "Timing", "By Cond", "Active", "Alarm", "Pause", "Fault",
"Waiting", "FltWait", "Irrigat", "Fertig.", "FltIrig", "FltFert"
Pause Seq.-Min. 0 Enables pausing the sequence for a predefined time in minutes.
Next Irr.Time 14:30 The next irrigation start time in the sequence. Editable.
Days to Next Ir. 1 0=today, 1=tomorrow and so on. Editable.
Irr.Cycles Left 1 Editable.
Time left Min. 45 Time remaining to the end of the sequence.
Manual Oper. Automat Use the "+" and "-" keys to manually alter the sequence status:
Automat - the normal state.
Start - Start the sequence again.
Stop - Stops the current cycle.
Pause - Permanently pauses the current cycle.
CnclTdy - The sequence will not irrigate today.
Valve 1. Finish Start Enables manual control for each valve in the sequence. The
following options are available:
Automat
Start
Stop
Pause
CnclTdy
As noted Gal Pro AC can open about 4 valves simultaneously.
Valve 0. None Automat
Valve 0. None Stop
Valve 0. None Pause
Valve 0. None CnclTdy
Valve 0. None Automat
Valve 0. None Automat
Valve 0. None Automat
Today Wtr.Mul. 0% Enables changing the amount of water in all of the valves in the
sequence today.
Cncl.Fert.Today Yes Enables canceling fertilization today.
Press + to reset
the sequence To reset the sequence press "+" and then "enter".
Resets the sequence data to zero.
Setup State OK If there are any definition errors they will be displayed here. The
options are:
"N.Activ", "Def. OK", "Vlv.Def", "Tim.Def", "No Time"
7. Information and Programming Menus
Services
System Setup
Sequence Setup
Filter Flush
Fertilization
Sequence Timing
Valve • Water & Fert.
Water Counter
Diaries
Alarms
Valve Info
Sequence Info
Manual Overriding
Sequence Status Valve Status
System Status