WATER SOFTENER START-UP
SECTION 1
6
1C.
PROGRAM THE TIMER
FIG. 1
Galaxy
VDR 14/100
When the transformer is plugged in, the model
code SC20 shows in the face plate display for a
few seconds, followed by a test number (exam-
ple: S4.0). After the test number, 12:00 AM begins
to flash. PRESENT TIME and RECHARGE
TONIGHT show at the bottom of the display.
NOTE:
If SC - - flashes in the display, press the UP
button (FIG. 1) until SC20 does show. Then press
the SELECT button to display the flashing 12:00
AM.
If other than SC20 shows,
when the
transformer is plugged in, please
see page 17 to
reset.
SOUND “BEEPER”:
A “beeper” sounds while
pressing buttons for timer set-up. One beep
signals a change in the face plate display.
Repeated beeps means the timer will not accept a
change from the button you have pressed, telling
you to use another button. For example, while
setting the hardness (step 2), the beeper sounds
repeatedly when the display reaches 1 using the
DOWN button, or the highest hardness setting
using the UP button.
1. SET PRESENT TIME OF DAY:
NOTE:
If the words
…
PRESENT TIME do not show
in the display, press the SELECT button (FIG.
1) until they do.
Q
Press the
UP/DOWN
buttons to set the
present time. Press UP to move the display
ahead; press DOWN to move the time backward.
If the present time is between
noon and midnight, be sure PM
shows.
If the present time is between
midnight and noon, be sure AM
shows.
NOTE:
Each press of the UP/DOWN buttons changes
the time by 1 minute. Holding the buttons in
changes the time 32 minutes each second.
