WATER SOFTENER START-UP
SECTION 1
5
1B.
CHECK LIST OF ALL STEP-BY-STEP GUIDES TO INSTALL
Refer to the Installation Manual, for step-by-step
guides.
To be sure you have done all the steps to install
the softener, read the following list. Page num-
bers referred to are in the
Installation Manual.
Is the house water flow going INTO the soft-
ener valve INLET? Trace piping to be sure.
See pages 10 and 11 of the installation manual
Is the plumbing bypass valve (or 3 valves) set
for SERVICE? See page 18 of the installation
manual.
Is the valve drain hose connected the right
way, and without sharp bends or kinks that
could stop or reduce water flow? See page 16
of the installation manual.
Is the softener power cable connected to the
transformer
…
and
is
the
transformer
plugged into an inside, 220 - 240V-50Hz elec-
trical outlet. See page 20 of the installation
manual.
Be sure to restart the water heater. See page 20
of the installation manual.
Note: If applicable set the hardness bleed
screw of the bypass to the desired residual
hardness.
BRASS BYPASS
VALVE
PLASTIC BYPASS
VALVE
3 -- VALVE
BYPASS
WATER
HEATER
