gala gar 47000000, Техническое руководство по эксплуатации

Страница: 34 / 67

TIG 3200 AC/DC
34
5.1.11. CYCLE PARAMETERS –TIG DC PROCESS.
From this screen we will set the values that define the welding cycle. The cycle chart and the parameter selection table
(Table 4) they will change depending on the selection of welding mode.
KEY ACTION DESCRIPTION
P1 Move out to source process Request to confirm changes in case of modification.
P2 Access to Operation Mode Accesses the selected process mode.
P6 Restore original settings Retrieves the original parameter settings.
E1 Select parameter
Selected parameter with white bar.
Navigating through the parameter selection table, the corresponding seg-
ment of the upper cycle graph will light up simultaneously.
E2 Modify parameter
Each different cycles will be composed by different regulation parameters, that will vary depending on the selected
operating mode:
TABLE 4 – TIG DC
PARAMETER DESCRIPTION FUNCTION OBSERVATIONS UNIT RESOLUTION
TPR Pre-gas time Facilitates arc ignition. Seconds 0,1
IS Intensity start Reduces priming cracks. % 1
TIS Intensity start time Perform pre heating of material Only mode 2TS Seconds 0,1
UPS Up time Reduces initial tension. Seconds 0,1
IB Base Intensity Thermal Reduction.
Only PULSE -
BIPULSE
% 1
Dcl Duty cycle
Balance the pulse for thermal
control.
% 1
TCP Tack crumble pulse Smooth transition I
₂
-IB Milliseconds 10
DWS Down time Reduces final tension.. Seconds 0,1
IE Final Intensity Reduces crater cracks.. % 1
TIE Time Final Intensity Reduces crater size. Only mode 2TS Seconds 0,1
TPS Post gas time Prevents cord oxidation. Seconds 0,1