gala gar 47000000, Техническое руководство по эксплуатации

Страница: 9 / 67

TIG 3200 AC/DC
9
3.2. LAY-OUT OF INSTALLATION TIG.
We can use our equipment independently or with external cooling systems. Especially, we recommend the use of refrig-
erated installations for alternating current (aluminum) welding, since the heat absorbed by the torch is much higher than
that supported in direct current (carbon and stainless steels).
Before starting to read the next section, we recommend that you remember the identification of elements and connectors
described in section 3.1. Operation Controls.
Next we will develop the different options of facilities that they can be made depending on the use of chosen mode.
3.2.1. TIG INSTALLATIONS WITHOUT COOLING.
For all TIG welding processes, including alternating current welding, we recommend connecting the torch

to negative
terminal B2 and the grounding

to the positive B1. Additionally we will connect the gas fitting of the torch to the gas
outlet of the machine G2 and the torch switching connector to the panel connector CN2 (Torch Control) .
We will install the pressure reducer

to the gas bottle and connect the gas pipe

to the pressure reducer and to the
quick plug G1 located at the rear of the machine.
Optionally we can install a remote control

to the connector CN1 (Telenet) located at the rear of the machine.
We will plug in the power input cable  (A) to the electric-net and we will be ready to work.
MARK REFERENCE DESCRIPTION OBSERVATIONS
1 19052614 Torch 5XT-26 4m Optional
1.1 63716017 Male straight air connector 9v Included as standard
1.2 47016065 Adapter fitting M-1/4” - Quick Plug (DN5) Included as standard
2 43812219 Welding mass (35 mm2-4mt) Included as standard
3 42312022 Input cable Included as standard
4 (A) 37600000 Pressure reducer EN 2000 Argon Option A
4 (B) 37900000
Pressure reducer GAS FREE (Saving gas up to
50%)
Option B recomended
5 42312030 Gas Pipe (2m/racor rápido) Included as standard
6 42312058 Remote control. Universal Control. Optional