13
3.2.5 UNGUATOR® Spindle
The UNGUATOR® Spindle serves as a dispensing system for UNGUATOR® jar sizes 300
ml or 500 ml UNGUATOR® Jars that come with UNGUATOR® Spindles. The spindle has
to be removed by rotating it clockwise prior the mixing process. The bottom can be slid
up and down when the UNGUATOR® Spindle is screwed slightly (1/2 to max. 1 turn)
counterclockwise without perforating the movable bottom (a slight resistance can be felt
before the bottom is perforated).
Air can be decreased by placing the UNGUATOR® Jar onto the table and using both hands
pushing the jar against the table.
Before giving the UNGUATOR® Jar to the customer, the UNGUATOR® Spindle must be
screwed in the UNGUATOR® Jar counter clockwise from the bottom till it locks into place.
The UNGUATOR® Spindle must be turned clockwise to extract the ointment. To remove
the ointment the UNGUATOR® Spindle must be twisted to the right. One turn dispenses
approx. 20 ml of the contents of the UNGUATOR® Jar.
Caution!
If the movable bottom is accidentally perforated or the spindle is permanently
locked in the bottom of the jar, the UNGUATOR® Jar may only serve as dispensing or storage
vessel and can no longer be used for the mixing process.
Pic. 19: How to operate the UNGUATOR® Spindle
Pic. 20: UNGUATOR® Spindle
