27
conditions. Heed the relevant safety regulations when handling hazardous substances
(e.g. combustible liquids such as alcohol or similar substances).
•
UNGUATOR® devices correspond to the safety standards for laboratory equipment.
They have to be positioned to prevent any interference or use by unauthorized
persons.
•
The UNGUATOR ® e/s should pause for at least 5 minutes after a mixing period of
30 minutes.
•
The device must not be disposed of in ordinary domestic waste. Please
deliver the device to the available collecting and recycling systems at the
end of its life cycle.
6.5 Technical data of the UNGUATOR® B/R
Electrical requirement
90-265 V / 45-65 Hz
Power consumption (mixing motor)
550 W
Operating mode
KB 5 (1)
Safety class
I
Type of protection
IP 21
Speed controller
electronic controlled
Timer
-
UNGUATOR® Jar sizes
15...200 ml
Weight
15 lbs (6,8 Kg)
Dimensions (L x W x H in mm)
275x 180 x 500
Testing certifications
TÜV GS
(1) KB 5: 30 minutes interval after 5 minutes’ mixing operation. Please mind warning messages!
As to KB 5: Maximum load capacity will not be reached during normal operation. It is defined by 5 minutes’
mixing of pasta zinci in the UNGUATOR® 100 ml jar at 2000 RPM and 30 minutes’ cooling interval. A safety
element may switch off the device in the case of overload condition, e.g. at 3 ointment preparations in the
200ml UNGUATOR® Jar in quick succession.
6.6 Quality and material
Manufacturing facilities for the UNGUATOR® line of products is certified according to DIN
EN ISO 9001:2008. Regular quality control, ensures both outstanding and sustainable
quality of the UNGUATOR® Mixing Technology.
•
The UNGUATOR® Aplicators, Couplings and Jars, are made out of Polypropylen (PP)
and the regular UNGUATOR® Varionozzles of Polyethylen (PE).
