7
UNGUATOR® Disposable blade (Disp. blade)
The UNGUATOR® Disp. Blade is suitable for all UNGUATOR® devices. The mixing blade of
UNGUATOR® Disp. Blade is connected to the UNGUATOR® Disp. Blade shaft by twisting
the blade counterclockwise and can be disconnected after the mixing process with a
clockwise turn.
The material contact in the ointment is three times as high as when using the Disp. Blade
compared to the UNGUATOR® SMB at the same mixing speed. The counter rotating twist
of the mixing blades causes intensive material vibration in the material to be mixed and
achieves good product quality faster than using the UNGUATOR® SMB. We do however
recommend using the same mixing time as for the UNGUATOR® SMB.
In the process of final quality control
the mixing blade can be picked up and
discarded with the small end of the
shaft, or left inside the jar. Cleaning
is limited to the UNGUATOR® Disp.
Blade shaft. We recommend using the
UNGUATOR® Disp. Blade for substances
that may discolor the regular blade. This
type of UNGUATOR® MB also comes
with different shaft lengths. The range
of UNGUATOR® Jar sizes that can be
used for the application is marked for
orientation on the weak end of the shaft.
(15-100 ml and 200 ml respectively)
Assignment of the UNGUATOR® MB
Please make sure to use the correct UNGUATOR® MBs for the corresponding UNGUATOR®
Jar (Fig. 6). Mixing up may cause failure messages.
Please also ensure that the right shaft is used with the
UNGUATOR® Disp. Blade. Both available shafts are marked for
use with sizes 15–100 ml or 200 ml UNGUATOR® Jar. They have
to be combined with the correct UNGUATOR® Disp. Blade, and
while the same UNGUATOR® Disp. Blade is used for the 100 and
200 ml UNGUATOR® Jar sizes, it still needs a different shaft for
each jar size. Please also mind the operating instructions that
come with the shafts.
Fig. 7: UNGUATOR® Disposable Blade (HD)
Pic. 8: Handling the
UNGUATOR® Disp. Blade
