Gaggenau CI 261, Инструкция по эксплуатации

Страница: 17 / 24

17
To access the basic settings:
The hob must be off.
1 Switch on the hob.
2 Within ten seconds, touch and hold the
0
symbol
for approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
3 Touching the
0
symbol again takes you to the
basic settings.
™
and
‚
flash alternately on the displays and
‹
appears as a presetting.
4 Touch the
0
symbol repeatedly until the required
function is displayed.
5 Then select the required setting from the settings
area.
6 Touch the
0
symbol for at least four seconds.
The settings have been saved.
Leaving the basic settings
Turn off the hob with the main switch.
Suitability test of tableware
This function can be used to check the speed and
quality of the cooking process depending on the
cookware.
The result is a reference value and depends on the
properties of the cookware and the hotplate being used.
1 With the cookware still cold, fill it with approx.
200 ml of water and place it on the centre of the
hotplate with the diameter that most closely
matches that of the base of the cookware.
2 Go to the basic settings and select the
™‚ƒ
setting.
3 Touch the settings range.
A
will flash on the
hotplate display.
The function has now been activated.
After 10 seconds, the result for the quality and speed of
the cooking process will appear on the hotplate display.
Check the result using the following table:
To reactivate this function, touch the settings range.
Notes
‒ If the diameter of the hotplate used is much smaller
than the diameter of the cookware, only the middle
of the cookware can be expected to heat up. This
may result in the cooking results not being as good
as expected or being less than satisfactory.
‒ You can find information on this function in the
section on
~
"Basic settings"
‒ You can find information on the type, size and
positioning of the cookware in the section on
~
"Cooking with induction"
Product information Display
Directory for the technical after-sales service
(TK)
‹‚
Production number
”š
Production number 1
Š†
.
Production number 2
‹
.
†
\|
\|
Result
‹
The cookware is not suitable for the hotplate and will
therefore not heat up.*
‚
The cookware is taking longer to heat up than expected
and the cooking process is not going as well as it
should.*
ƒ
The cookware is heating up correctly and the cooking
process is going well.
* If there is a smaller hotplate available, test the cookware
again on the smaller hotplate.
X|
Y| [|
\|