Gaggenau CI 261, Инструкция по эксплуатации

Страница: 13 / 24

13
Timer functions
Your hob has two timer functions:
▯
Cooking timer
▯
Short-term timer
Cooking timer
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1 Select the hotplate and the required heat setting.
2 Touch the
0
symbol.
x
lights up in the display for
the hotplate.
‹‹
lights up in the timer display.
3 Within the next 10 seconds, select the required
cooking time in the control panel
After a few seconds, the time begins to elapse.
Note: The same cooking time can be set automatically
for all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically programming
the cooking time in section
~
"Basic settings"
Changing or deleting the time
Select the hotplate and then touch the
0
symbol.
To delete the cooking time, change the cooking time in
the control panel or set it to
‹‹
.
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The
time program function lights up
‹‹
for 10 seconds in
the display.
When the
0
symbol is pressed, the indications turn off
and the beeping stops.
Notes
‒ If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
‒ Select the relevant hotplate to call up the remaining
cooking time.
‒ You can set a cooking time of up to
ŠŠ
minutes.
The short-term timer
You can use the short-term timer to set a time of up to
99 minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Programming
1 Press the
0
symbol several times until the
V
indicator lights up.
‹‹
appears in the time
programming function display.
2 Use the
ó
to
ê
buttons to set the required time.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Press the
0
symbol several times until the
V
indicator
lights up.
Adjust the time in the control panel or set it to
‹‹
to
end the timer.
When the time has elapsed
An audible signal sounds.
‹‹
flashes in the time
programming function display and the "on" time
V
lights
up. The indicators switch off after 10 seconds.
Press the
0
symbol to switch off the indicators.
[|
\|
[|
\|