Gaggenau CI 261, Инструкция по эксплуатации

Страница: 15 / 24

15
Display cleaning protection
If you wipe over the control panel while the hob is
switched on, settings may be changed. To avoid doing
this, you can use the hob's "Lock control panel for
cleaning" function.
To switch on: Touch the
š
symbol. A signal sounds and
the indicator above the
š
symbol lights up. The control
panel is locked for 35 seconds. You can now wipe over
the surface of the control panel without changing any
settings.
To deactivate: The control panel will be unlocked once
35 seconds have elapsed. The indicator above the
š
symbol goes out. To release the function early, touch the
š
symbol.
Notes
‒ An audible signal sounds 30 seconds after
activation. This indicates that the function is about
to finish.
‒ The cleaning lock does not lock the main switch.
The hob can be switched off at any time.
Automatic safety cut-out
If a hotplate operates for an extended period and no
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
”
,
‰
and the residual heat
indicator
œ
or
•
flash alternately in the hotplate display.
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours). .