Gage CompuScope 14100C, Руководство по аппаратному обеспечению и инструкция по установке драйверов

Страница: 22 / 174

16 Installing CompactPCI/PXI Master/Slave multi-card systems
9 Attach the Master/Slave Timing Module (MSTM) to the cards.
Plug the MSTM to the front panel of the CompuScope cards and then attach the MSTM to the
CompuScope cards using the screws provided with the MSTM.
The MSTM can only be inserted into the installed Master/Slave Set in one orientation. Do not force.
The text on the MSTM label should be right side up.
Figure 13: Attach the Master/Slave Timing Module (CS14100C shown)
10 Turn on the power switch of the CompactPCI chassis.
11 Install software drivers.
Refer to the section within this manual called Driver installation guide for instructions on installing
Windows drivers for the CompuScope cards. Windows drivers are supplied with the product on CD.
12 Verify presence of the CompuScope card using the configuration utility provided with the drivers.
Refer to the section within this manual called Driver installation guide .
13
(Optional) Verify the operation of the card using or CSTest.
and CSTest are sample programs provided with the CompuScope drivers to ensure proper
operation of the CompuScope cards. is provided with the 3.82.xx drivers and CSTest is
provided with the 3.60.xx drivers. Please refer to the section within this manual called
Section 3 –
Verifying signal acquisition with for details on running .
14 Install GageScope software for CS82GC, CS14100C and CS1610C.
Refer to the section within this manual called GageScope in the Driver installation guide section for
instructions on installing this software.
If you have a CS3200C, install GageBit software.
Refer to the section within this manual called Free Applications in the Driver installation guide section
for instructions on installing this software.