Gage CompuScope 14100C, Руководство по аппаратному обеспечению и инструкция по установке драйверов

Страница: 135 / 174

CompuScope 1610C 129
What you should receive with your CompuScope 1610C
If you order an independent CompuScope 1610 card, you should receive the following articles:
•
One CompuScope 1610C card (of memory model type purchased)
1M model 8M, 128M or
1G model
•
Standard items included with each independent CompuScope card
Hardware Manual, including Driver Installation Guide
Note that you will receive only one copy of the Hardware Manual per
order placed with Gage. Additional copies can be requested at order
time.
The Hardware Manual is also available in PDF format on the Gage
Software Disk or you can download card-specific manuals from Gage’s
Web site (www.gage-applied.com).
Gage Software Disk (with GageScope Software)
The Gage Software Disk, included on the inside-front cover of the
Hardware Manual and Installation Guide, contains all of the software
drivers you need to operate your Gage hardware. The CD also contains
all of the installers for the application packages provided by Gage,
including Lite, Standard and Professional editions of GageScope.
Note that some packages will only be available if you have purchased
the software and have a key provided by Gage.
CompuScope Certificate of NIST Traceable Calibration
Each CompuScope card is shipped with a Certificate of NIST Traceable
Calibration. NIST is the National Institute to Standards and
Technologies - the US organization that is responsible for the
definitions and measurement of metrology standards.
Prior to shipment, Gage runs each CompuScope card through a battery
of over 1000 automated performance verification tests using a NIST
traceable calibration source. The tested CompuScope is then
considered a NIST traceable calibration instrument for a period of one
year – the calibration interval that is generally accepted by the Test and
Measurement industry.