Gage CompuScope 14100C, Руководство по аппаратному обеспечению и инструкция по установке драйверов

Страница: 97 / 174

CompuScope 82GC 91
EXTERNAL TRIGGER
Impedance: 1 M
Ω
, 25 pF
Amplitude: Absolute Max ±15 V
Voltage Range: ±1 V and ±5 V
Bandwidth: 300 MHz
Coupling: AC or DC
Connector: BNC
TRIGGER OUTPUT
Signal Type: TTL
Active Edge: Rising (low-to-high)
Synchronization: Synchronized to on-board system clock
INTERNAL CLOCK
Source: 1 GHz SAW oscillator
Accuracy: ± 200 ppm
EXTERNAL CLOCK
Maximum Frequency: 1 GHz
Minimum Frequency: 10 MHz
Signal Type: Sine wave
Connector: SMA
Signal Level:
MIN 225 mV RMS
MAX 500 mV RMS
Impedance: 50
Ω
Sampling Edge:
Single:
Rising and Falling
Dual: Rising
Coupling: AC
Duty Cycle:
50% ±5% Single/Dual
MULTIPLE RECORD
Pre-trigger Data: Up to 32K points
Record Length: 256 (512) points minimum.
Can be defined with a 128 (256) point resolution in dual (single) channel mode
Max. number of Triggers: 21,845 with 16M model
Re-arm time:
152 (304) sample clock cycles in dual (single) channel mode
MULTI-CARD SYSTEMS
Operating modes: Master/Slave or Multiple Independent
Number of Cards
Master/Slave:
2 cards
Multiple/Ind.: Limited by backplane
Maximum Number of Channels in Master/Slave Mode:
4 at 1 GS/s
2 at 2 GS/s