GABRIEL KERAMIK AB
20 • STUDIO2
30
31
32
80/125
80/100
Cassette installation
(Studio, Studio2 and round tiled stove)
Outdoor cumbustion air inlet
Mount the reduction flange to the flexible tube and
connect to the flange for inlet air through the floor.
Indoor cumbustion air inlet
Mount the reduction flange to the flexible tube and
connect to the flange for inlet air through the base.
Place the enclosed rockwool sheet.
Cut out a square hole the same
size as the hole in the firebox plate
as indicated.
Fit in the cassette so that the steel
flanges round the cassette are
inside the tiles and the brass frame
is in contact with the tiles.
Note:
If the cassette does not fit correctly
at the bottom edge this can be
compensated by removing some
rockwool in the forward edge or
with a thin layer of mortar in the
rear edge
under
the plate. There-
after the cassette should rest stable
and even on the bottom. The brass
frame should at the same time fit
tight against the tiles.
