G.T.Power E6D Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 22

G.T.Power E6D Скачать руководство пользователя страница 21

13. Battery status view

You  can  check  the  battery  status  simply  by
connecting it to charger. After connecting the battery
to  charger,  select  'BAT  STATUS'  program  at  main
menu.  You  can  see  the  data  which  has  been  read
from the output of charger.

Input vol: DC voltage at the charger's input lead.

Temp:

The temperature is read out from the

temperature sensor. If it is not linked, the value will
be zero.

Battery vol:

The output voltage of battery.

CI~C6:

The individual voltage of battery pack. The

balance tab should be connected to the balance port
of charger.

14. Glossary of terms

Amps(A):

The unit of measuring for charge or discharge electric current. The program of

the charger will be show the current in amp(A) at its display.

Milliampere (mA):

The electric current, being amps(A) multiplied by 1000 and noted as 'mA'.

So 2.0A is the same as 2000mA (2.0*1000). Or, to convert mA to amps, divide the mA
number by 1000. If a current value is below 1.0A, the display of charger will still show the
current in amps, not milliampere. For example, a current of 600mA will be displayed as 0.6A.

Capacity, milliampere hours (mAh), and amp-hour (Ah):

Charge energy stored by a

battery  is  called  capacity,  which  is  defined  as  how  much  current  a  battery  can  supply
constantly  over  one  hour  of  time.  Most  hobby  batteries  are  rated  for  capacity  in  'Ah'  or
milliampere  hours.  A  650mA  battery  can  delivery  650mA  of  current  for  one  hour
(650A*1hr=60Ah).

Nominal voltage (V):

The nominal voltage of the battery pack can be determined as follows;

-

NiCd or NiMH: multiply the total number of cells in the pack by 1.2A 8-cell pack will have

a nominal voltage of 9.6 volts (8*1.2).

-

LiPo: multiply the total number of cells in the pack by 3.7A 3-cell LiPo wired in series will

have a nominal voltage of 11.1 volts (3*3.7).

-

Lilo: multiply the total number of cells in the pack by 3.6.

-

LiFe: multiply the total number of cells in the pack by 3.3.

If the nominal voltage of battery is not printed on the battery's label, consult your battery
manufacture or supplier. Do not guess the rated voltage of battery.

'C'-rating:

Capacity is also referred to as the 'C' rating. Some battery suppliers

recommend charge and discharge current based on the battery 'C' rating. A battery's '1C'
current is the same number as the battery's rated capacity number, but noted in mA or
amps. A 600mAh batter has a 1Ccurrent value of 600mA or 0.6A.

Manual of the charger E6D

19

DC: 90W IV: 12.25V

BAT STATUS

Status View

InV:

12.25V

Temp:

0

℃

Battery Vol:

12.46V

C1: 4.17V C2: 4.17V
C3: 4.15V C4: 0.00V
C5: 0.00V C6: 0.00V
VL: 4.15V VH: 4.17V

«
...
19
20
21
22
»

Содержание E6D























Отзывы:

Нет отзывов