G.T.Power E6D Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 22

G.T.Power E6D Скачать руководство пользователя страница 13

These  programs  are  for  charging,  discharging  or  cycle  NiMH  (Nickel-Metal-Hydride)  or
NiCd  (Nickel-Cadmium)battery  commonly  used  for  R/C  model  applications.  The  charge
current  varies  according  to  the  battery  capacity  and  performance.  The  type  of  battery
which is either NiMH or NiCd must be correct for the battery being charged.

Selct 'CHG/DCHG' program at main menu by pressing 'UP' or 'DOWN' button, and press '
ENTER' to go for the program.

You can choose the type of battery to be charged or discharged at the first section. Select
NiCd or NiMH according to your battery. And then , select the data number which will
newly set up, or load the data set-up data which had been performed successfully before,
you can just start the process after loading the data number. All setup data will be stored at
charger's memory automatically after setting them all. Input the cell-count and capacity of
the battery will be charged at the top line of menu. The cell-count and capacity need to be
matched with the battery.

Use 'UP' or 'DOWN' button to scroll up and down the menu, and change the value by
using 'INC' or 'DEC' button. To start the process, press and hold 'ENTER' button for more
than 3 seconds regardless of cursor position.

- Chg current:

Set the charge current. (0.1-6.0A)

-

Dchg current:

Set the discharge current. The value may not exceed 1C for a maximum

safety. (0.1-1.0A)

- Dchg voltage:

Set the final voltage which the battery will reach at the end of discharge

.The default value is 0.90V/cell. (0.1-1.2V/cell)

8. NiMH/NiCd battery program

NiCd

[0] 1C 5000mAh

Chg current: 0.1A
Dchg current: 0.1A
Dchg voltage: Default
Delta peak: Default
End current: Auto
Trickle curr: 100mA

DC:180W IV:14.05V

START
ENTER

8.1 Parameter set-up for NiCd/NiMH battery

NiCd

[0] 1C 5000mAh

Chg current: 0.1A
Dchg current: 0.1A
Dchg voltage: Default
Delta peak: Default
End current: Auto
Trickle curr: 100mA

NiCd

[0] 1C 5000mAh

Chg current: 0.1A
Dchg current: 0.1A
Dchg voltage: Default
Delta peak: Default
End current: Auto
Trickle curr: 100mA

LiPo
LiFe
LiIo
NiMH

Pb

NiCd

Manual of the charger E6D

11

DC: 90W IV: 12.25V

CHG/DCHG

«
...
11
12
13
14
15
...
»

Содержание E6D























Отзывы:

Нет отзывов