G.T.Power C6D Pro, Руководство пользователя

Страница: 20 / 28

2:
13
、
Special function introduction
We’ve added some extra functions for C6dpro, such as motor-run, digital power, tire warmer,
PWM test etc.
MOTOR-RUN 003:20
0.6A 24.90V
16W 2.1A 8.05V
MOR 000:06 00003
13.1 Motor-run introduction
This program aims to test the quality of DC two-phase motor and check the quality of motor.
Set the motor’s input power, check its output current and power, assisted with certain test
equipment to judge the motor using status and quality.
CC-CV Out
12.0A 25.00V
2W 0.1A 25.00V
CCV 000:28 00000
13.2 Digital power
Under this program, this charger can be used as a digital
power to power on other instrument, but can not be used as
a charger to charge/discharge. Voltage range is 0.2 -15V,
current 0.2-12A, max. Power 300W.
Select digital power program, Press and hold START for 2
seconds to start the program, interface will show the output
voltage, current and power.
Press STOP to end the program, back to set interface.
13.3 Tire warmer function introduction
Thetire warmer function is used for thehot-melt rc car tire. It can heat the hot-melt tire
quickly and increase the grip force to the ground. To use this function, you need to equip
with the heating cup.
According to the program flow chart, select Motor run
function, connect the positive and negative power supply
lines of the DC motor to the positive and negative output
terminals of the charger, adjust the current and voltage
through press DEC/INC. After set finished, short press ENTER
to finish voltage set.(current 0.1-12A, voltage: 0.2-25V)
After finished, long press ENTER enter into test interface. If
need re-set, short press STOP back to set interface.