G.T.Power C6D Pro, Руководство пользователя

Страница: 12 / 28

22
LiIo DISCHG
2.0A 0.0V(0S)
3S 0.4A 11.84V
DSC 000:12 00001
3S 0.4A 11.81V
STD 000:05 00000
LiPo STORE
3.0A 11.1V(3S)
The second line left side to set dicharge current value, right
side to set the battery pack voltage value. After done, press
and hold Start/Enter for 3 seconds to start the program.
（
dicharge current
：
0.1
～
3.0A,cell voltage
：
1
～
6cells
）
It shows the current discharging status. Press Batt type/Stop
to stop discharge.
The second line left side to set storage current value, right
side to set the battery pack voltage value. After done, press
and hold Start/Enter for 3 seconds to start the program.
（
storage current
：
0.1
～
3.0A,cell voltage
：
1
～
6cells
）
It shows the current storage status. Press Batt type/Stop to
stop storage.
Lithium battery storage mode is to adjust each kind of battery voltage to a certain level
（
LiPo:3.85V
，
Lilo:3.75V
，
LiFe:3.3V,LiHV
：
3.85V, this will make lithium batteries suitable for
long-term storage. If the voltage of the battery at its initial stage is higher than the rated
voltage,the program will start to discharge. If lower than the rated voltage, will start to
charging.
7.3 Storage mode for Lithium battery
LiPo 1.0A 11.91V
REP 000:05 00001
LiPo REPAIR
1.5A 11.1V(3S)
The second line left side to set charge current value, right
side to set the battery pack voltage value. After done, press
and hold Start/Enter for 3 seconds to start the program.
（
charge current
：
0.1
～
1.5A,cell voltage
：
1
～
6cells
）
It shows the current status, press Batt type/Stop to stop the
repair program.
This program can be used to repair the voltage gap between battery packs through a
unique program to charge the low voltage cell with a small current to increase the battery
activity, so that the voltage of each cell in the whole battery pack is consistent.
7.4 Lipo battery repair