G.T.Power C6D Pro, Руководство пользователя

Страница: 16 / 28

26
Lead Acid(PB)
Battery Mode
Pb CHARGE
3.4A 20.0V(10P)
Pb 0.7A 7.85V
CHG 000:04 00000
9
、
Pb battery program
This program is used for charging/discharging Pb batteries,
rated voltage from 2 to 20V.Pb batteries are different from
NIMH/NiCd batteries,Pb battery has a lower battery capacity
than NIMH/NiCd battery, they can only pass relatively lower
current,as well as have some current restraints during
charging process.Pb battery’s current is 1/10 of its battery
capacity, it can’t fast charging, you have to refer to the
specifications of the battery manufacturer when charging.
NiMH FB-DIS
12.0A 9.0V
SET INPUT BATT
Pb 14.7V(6P)
Set the charge current value on the second line left side, set
the battery pack voltage on the right side. After set finished,
press and hold Start/Enter for 3 seconds to start the
program.(current
：
0.1
～
12.0A,battery voltage
：
0.8-25V)
Press ENTER to start program
Set input battery type and voltage, press and hold Start/Enter
for 3 seconds to start the program.
Set charge current on the left side and nominal voltage on
the right. Press Start /Enter for 3 seconds to start the charging
process.
（
current
：
0.1
～
12.0A, battery voltage
：
1-10P
）
9.1 Charging Pb battery
discharge. For your safety, the discharge current value displayed on the screen should not
exceed the maximum discharge current specified by the battery manufacturer, and the
rated voltage should not be lower than the voltage level recommended by the battery
manufacturer to avoid deep discharge. Select discharge battery type and voltage correctly.