G.T.Power C6D Pro, Руководство пользователя

Страница: 14 / 28

24
L3Bo 1.0A 12.16V
CHG 000:08 00002
4.15 4.15 4.15 V
0.00 0.00 0.00 V
8. NiMH/NiCd battery program
It is designed for charging and discharging NiMH or NiCd battery that commonly used for
R/C model .
NiMH/NiCd
Battery Mode
NiMH CHARGE
CURRENT 5.2A
NiMH 0.3A 7.81V
CHG 000:05 00000
The screen turns bright when press Start/Enter, then you can
press DEC/INC to change the parameter value,press
Start/Enter to store
The second line left side to set charge current value, right
side to set the battery pack voltage value. After done, press
and hold Start/Enter for 3 seconds to start the program.
（
charge current
：
0.1
～
12.0A
）
Press Start/Enter for 3 seconds to start the program.
8.1 Charge NiCd/NiMH battery
NiMH DISCHG
3.0A 7.3V
NiMH 0.7A 7.70V
DSC 000:04 00000
The second line left side to set charge current value, right
side to set the battery pack voltage value. After done, press
and hold Start/Enter for 3 seconds to start the program.
（dis
charge current
：
0.1
～
3.0A, battery voltage:0.8-25V
）
The screen shows the current discharging status, press Batt
type/Stop to stop discharge.
8.2 Discharging NiCd/NiMH battery
It shows the current charging status, press Batt type/Stop to
stop charge.
It shows each battery pack single cell voltage.