10
SL DC2 Circuit Board Adjustments
SL DC2 CONTROL BOARD
Motor Torque / Obstruction Sensing / Auto Reverse Adjustment
Refer to the “
SL DC2 Circuit Board”
data sheet included with this manual and locate the
‘FORCE’ trim pot on the circuit board
.
This adjustment controls the motor torque and obstruction sensing of the gate motor. The motor
needs to have enough torque (force) to fully open and close the gate. However, the more torque
the motor has, the less obstruction sensitivity there is and therefore the gate may hit an obstruc-
tion more forcefully.
Usually the motor FORCE trim pot is set to the half way position however turn the FORCE trim
pot anti-clockwise (-) to increase sensitivity to an obstruction or turn the FORCE trim pot clock-
wise (+) to increase the motor torque (force) of the motor.
Motor Force Trim Pot
SL DC2 GATE MOTOR
INSTALLATION AND SET UP
INSTRUCTIONS
© 2012 G Force Automatic Gates All Rights Reserved
