Original manual for petrol chainsaw FX-KSP series
42
Area A
◼
First cut from the bottom up to approx. 1/3
of the trunk's diameter (
1
).
◼
Then cut from the top down to complete
the cut (
2
).
Area B
◼
First cut from the top down to approx. 1/3
of the trunk's diameter (
1
).
◼
Then cut from the bottom up to complete
the cut (
2
).
Cutting branches - tree on the
ground
CAUTION!
Risk of injury!
Be aware of branches that could fling back
during work.
First check in which direction the branch is bent.
◼
Make the first cut on the inside of the
bend (
1
).
◼
Then cut through the branch from the
opposite side (
2
).
Cutting branches - tree standing
CAUTION!
Risk of injury!
Ensure that suitable measures are taken for
personal safety when cutting branches off
standing trees.
−
Ensure that the ladder or means of ac-
cess is of a sufficient length.
−
Do not use structurally weak ladders.
−
Always keep your centre of gravity in
mind when performing work.
−
Do not overstretch.
−
Do not saw above shoulder height.
−
Always hold the chainsaw with both hands.
◼
First cut the branch from the bottom up (
1
).
◼
Then cut through the branch from the top (
2
).
Maintenance and care
WARNING!
Risk of injury!
Sharp saw chain! Wear safety gloves when
working with the saw chain.
In the interest of personal safety!
Only perform the maintenance tasks de-
scribed here yourself.
All other work, particularly engine servicing
and repair, must be carried out by qualified,
authorised specialist personnel. If work is per-
formed incorrectly, equipment damage may
ensue which can cause very serious injuries.
WARNING!
Before carrying out any maintenance, repair,
cleaning and inspection measures, make
sure that the engine is switched off and all of
the components have cooled down. Prevent
unintentional starting of the equipment by
pulling out the spark plug connector.
