51839925_V_1_3.DOC
53/102
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
500 W
DMX-control-channels:
14
DMX-512-connection:
3-pin XLR
Flash-rate:
13 Hz
Colour-wheel:
8 dichroic filters and open
Static gobo-wheel:
7 gobos and open
Rotating gobo-wheel:
6 gobos and open
Outside diameter of the gobos:
27 mm
Image diameter of the gobos:
23 mm
Maximum PAN-movement 180°:
in 0.85 s
Maximum TILT-movement 50°:
in 0.83 s
Dimensions (LxWxH):
800 x 395 x 350 mm
Weight:
25 kg
Maximum ambient temperature T
a
:
45° C
Maximum housing temperature T
B
(steady state):
80° C
Min.distance from flammable surfaces:
0.5 m
Min.distance to lighted object:
0.5 m
Fuse:
T 4 A, 250 V
Accessory:
SYLVANIA BA250/2SE D 90V/250W GY9.5 8500K
No. 89106120
GE CSD250/2 95V/250W GY-9.5 2000h 8500K
No. 89106100
PHILIPS MSD250/2 90V/250W GY-9.5 2000h
No. 89106115
OSRAM HSD250/80 90/250W GY9.5 3000h 8000K
No. 89106210
FUTURELIGHT CP-240 controller
No. 51834265
FUTURELIGHT CP-256/64 controller 16bit
No. 51834288
FUTURELIGHT CP-512/64 controller 16bit
No. 51834295
Wizard-512 USB DMX-So Interface
No. 51860102
Wizard-1024 USB DMX-So Interface
No. 51860110
FUTURELIGHT DES-3 DMX-terminator 3-pin
No. 51834001
FUTURELIGHT GH-27/23 type A gobo holder
No. 51836929
Please note: Every information is subject to change without prior notice. 11.01.2007 ©
