Future Design MCT-MC 4.3, Руководство пользователя

Страница: 131 / 186

MCT-MC
4.3
Offline Setup - 131 - FDC MCT-MC
From the Connection window, select the current network connection by double-tapping the connection icon to
enter its property window. DO NOT create a new connection. The Ethernet Drivers property window will allow
you to set the IP address as well as name primary and secondary DNS and WINS servers from the Name
Servers tab if necessary. Select “Specify an IP address” and enter in the desired IP address, subnet mask and
default gateway.
You can move the keyboard around on the screen to position it as necessary to access the different fields.
Once complete, close the Ethernet Drivers window by pressing the “OK” button located at the top right of the
window. Next, close the Connection window by pressing the “X” button at the top right of the window.
Access the taskbar and hide the keyboard by pressing the keyboard button at the bottom right of the taskbar
and select “Hide Input Panel”. DO NOT cycle power to the MC at this time. Wait approximately 2 minutes
before removing power. This provides time to allow the Windows CE operating system to save the new network
settings to the registry so that it uses the settings on the next reboot.
If power is cycled too soon, the network settings will revert back to the previous settings on the next power up.
Once the 2 minute time period has elapsed since updating the network settings, cycle power to the MC in order
to restart the system and return to normal operation with the new network settings.
11.1.3 Using the Web Server
The MC web server allows a user to remotely monitor operations anywhere via a PC’s standard web browser.
When enabled, the web server provides a detailed status page of the current operating conditions. The web
server can be enabled and disabled by pressing the web server (Www.) button on the communications screen
(select “Comms” from the Device\Settings\Set menu).