54
Common function
■ Calling the setting screen
① Use the
Jog key
to select the P.MIX
number you want to use.
② Call the setting screen by pressing
the
Jog key
.
●
P.MIX1 〜 4
（normal type）
●
P.MIX5 〜 6
（curve type）
P.MIX Selection
（P.MIX 1-6）
to P.MIX1 〜 4
set up screen
to P.MIX5 〜 6
set up screen
（P.MIX1 〜 4 set up screen）
Mixing rate adjustment
Offset
Master CH selection
Slave CH selection
Function activation
● When INH is selected, the
function cannot be used.
When ON or OFF is selected,
the function is activated. ON
and OFF changes are linked
to the switch.
Trim ON/OFF
Switch selection
Switch direction
● Select the item with the
Jog key
.
（Master CH Current position）
■ Function activation
① Select the MIX item and select ON
or OFF by pressing the
+ key
or
–
key
.
＋
－
or
● When you do not want to use
the function select INH.
■ Master/slave channel selection
② Select the MASTR channel you want
to use by pressing the
+ key
or
– key
.
③ Select the Slave channel you want to
us by pressing the
+ key
or
– key
.
● A knob VR or digital trim DT5/DT6, as well as channels 1
to 10, can be specified as the master channel. In addition,
when OFS was selected as the master channel, slave servo
operation is offset.
■ Mixing rate adjustment
＋
－
or
④ Select the RATE item and adjust the
mixing rate by pressing the
+ key
or
–
key
for each direction of the stick, etc.
selected at the master channel.
Range：
-100 〜 +100%
Default：
0%
● When you want to return the set value
to the initial value, press the
+ key
and
–
key
simultaneously.
（Changing the ON/OFF Switch）
■ ON/OFF Switch
selection
① Select the
"SW"
item and then
select the switch by pressing the
+
key
or
– key
.
or
Selection range：
SwA 〜
SwH、THR
■ Switch ON direction setting
② Select the
"POSI"
item and select the switch
ON direction by pressing the
+ key
or
–
key
.
● 2P SW：
NULL（always ON）, UP, DOWN
● 3P SW：
NULL（always ON）, UP, UP&D, UP&C, CNTR, C&DN,
DOWN
● THR stick: Hold the stick at the ON/OFF point
and set the ON/OFF position by pressing the
Jog
key
for 1 second. (If the
Jog key
is pressed for 1
second when the position was set, it returns to
the NULL state.) The switch ON direction can also
be selected by pressing the
+ key
or
– key
.
P.MIX1 〜 4
＋
－
or
＋
－
or
（1 second）
＋
－
