137
Helicopter
● Pitch curve setting examples
（Normal）
（Hold）
（Idle-up1）
（Idle-up2）
-100
+100
0
-50
+50
P1
P2
P3
P4
P5
%
P5= +70%
P4= +50%
P3= +6%
P2= -40%
P1= -70%
STICK
RATE
（The example of a setting ）
-100
+100
0
-50
+50
P1
P2
P3
P4
P5
%
P5= +100%
P4= +50%
P3=
0%
P2= -50%
P1= -100%
STICK
RATE
（The example of a setting ）
-100
+100
0
-50
+50
P1
P2
P3
P4
P5
%
P5= +40%
P4= +10%
P3= -10%
P2= -40%
P1= -70%
STICK
RATE
（The example of a setting ）
-100
+100
0
-50
+50
P1
P2
P3
P4
P5
%
P5= +40%
P4= +10%
P3= -10%
P2= -50%
P1= -80%
STICK
RATE
（The example of a setting ）
NOTE：
Set the actual value of the pitch curve according to
the fuselage specifications.
■ Activating the pitch curves（ID1/2/3, HLD）
＋
－
or
① Select the
"MIX"
item and then
select the
"ON"
or
"OFF"
by
pressing the
+ key
or
– key
.
● For the normal condition, "---" is displayed. (Always ON)
● When you do not want to use an idle up, hold curve, set
to "INH".
Range：
NOR, ID1, ID2, ID3, HLD
■ 5 point curve setting
② Select the setting item of each point (P-1 〜 P-5)
with the
Jog key
and set the travel of each point by
pressing the
+ key
or
– key
.
Range：
-100 ～ +100%
Default：
P-5: +100%
P-4: +50%
P-3: 0%
P-2: -50%
P-1: -100%
●
When you want to return the set value to
the initial value, press the
+ key
and
– key
simultaneously.
Pitch curve
■ Curve copying method
①
Select the
"CND"
item
and switch to the curve
copy mode by pressing
the
Jog key
.
② Press the
+ key
or
–
key
and select the copy
destination condition.
＋
－
or
③ Copy the condition by
pressing the
Jog key
for
1 second.
（1 second）
＋
－
or
