FUTABA CGY755, Руководство пользователя

Страница: 13 / 112

14
Verify that the gyros are operating and compensating in the correct
direction before each flight. If the compensation direction is incorrect
on any axis the model will become uncontrollable after takeoff.
The servo type parameters within the CGY760R/CGY755 must match
the type of servo you are using. Incorrect setting may damage the
CGY760R/CGY755 or the servos, possibly resulting in a loss of control
during flight.
Always allow the gyro to adjust to the surrounding environmental
temperature before flight. A large temperature change during use will
cause drift and other operational issues.
If you are switching between Normal Mode and AVCS Mode in flight,
please keep in mind that you must have the gyro re-learn the center
position after making a trim change within the transmitter. To memorize
the new center position simply flip the gain switch on the transmitter
three times between Normal Mode and AVCS Mode (Normal
AVCS
Normal AVCS) within one second. The servo will center indicating
that the new center position has been memorized.
When operating the gyro in AVCS Mode, all compensation and revo-
lution mixing must be disabled and any tail rotor or swash offsets for
flight modes must be disabled.
Do not drop the CGY760R/CGY755 onto a hard surface or subject
the CGY760R/CGY755 sensor to a strong shock as this may damage
the sensor.
Verify that the gyro is operating in the desired mode.
When the CGY760R/CGY755 is operated in AVCS mode the tail rotor
or swash plate servos will not center when tail rotor, aileron or rudder
stick is released. This is normal operation for AVCS mode. The servos
may also move to the extent while the model is being carried out to the
flight line. Before take off, you must visually center the tail rotor pitch
slider and level the swash plate by using the transmitter control sticks.
You can also center the servos by moving the tail rotor stick full left,