Fusion 2218173, Руководство пользователя

Страница: 18 / 32

16
CAUTION:
Make sure you connect red to red and black to black, and make
sure you screw the nuts on tightly.
4. Tighten the nut on each cabling terminal until it is snug.
Do not over-tighten.
5. Fasten the positive (red) clamp to the positive battery post, and
then fasten the negative (black) clamp to the negative battery post.
6. Turn on the unit by holding the switch located on top of the unit
until
888
is shown on the display. The digital display will show the
battery voltage, indicating that the inverter is operating normally
and AC power is available at the outlet.
7. Plug in the AC appliance you want to operate.
8. When not in use, always turn the inverter off by holding the switch
until the digital display turns off.