Fusion 2218173, Руководство пользователя

Страница: 17 / 32

15
WARNING: Shock Hazard
Batteries contain corrosive materials and present an electrical
shock hazard. To prevent irritation and burns, wear protective
eyewear and clothing when you install the inverter or work
with the batteries. Take special care to ensure that metal tools and
personal metal objects like rings and bracelets do not contact the
battery terminals.
Follow these steps to make a direct battery connection:
1. Place the inverter on a fl at surface.
2. Make sure that the unit is off by verifying the digital display is off.
CAUTION: Reverse Polarity
Power connections of the 12 V DC battery to the inverter
must be positive to positive and negative to negative.
A reverse polarity connection (positive to negative) will blow
a fuse in the inverter and may permanently damage the unit. Damage
caused by a reverse polarity connection is not covered by your warranty.
3. Connect the ring terminals on the DC cable clamps to the cabling
terminals on the unit. (The cabling terminals are shown in
Figure 2.) Fasten the positive (red) ring terminal to the positive
cabling terminal, and then fasten the negative (black) ring terminal
to the negative cabling terminal.