Fusion 2218173, Руководство пользователя

Страница: 16 / 32

14
5. Place the inverterʼs DC-DC accessory plug in the vehicleʼs DC
accessory socket or a 12 V outlet.
6. Turn on the unit by holding the switch located on top of the unit
until
888
is shown on the display.
The digital displiluay will show the battery voltage, indicating that
the inverter is operating normally and AC power is available at the
outlet.
7. Plug in the AC product you want to operate.
Important:
An AC product that is rated more than 100 watts may
blow the fuse of your vehicleʼs DC accessory socket or 12 V outlet.
If that happens, replace the fuse with a similar one as recommended in
your vehicleʼs manual. Follow the next section, “Connecting for loads
over 100 W”, if your AC product is rated more than 100 watts.
8. When not in use, always turn the inverter off by holding the switch
until the digital display turns off.
Connecting for loads over 100 W
To operate loads greater than 100 W continuously, you must connect
the unit directly to a 12 V battery using the DC cable clamps.
When the inverter is connected this way, you can operate loads of up
to 400 W.