Furuno SC-50S страница 20 Скачать руководство пользователя

Страница: 20 / 65

1. INSTALLATION

1-14

1.3

Mounting the Display Unit

1.3.1 Mounting

considerations

Consider the following points when choosing a mounting location.

•

Choose a location where vibration and shock are minimal.

•

Install the unit well away from locations subject to rain and water splash.

•

Locate the unit away from air conditioner vents.

•

Keep the unit out of direct sunlight because of heat that can build up inside its
cabinet.

•

Choose a well-ventilated location.

•

Leave sufficient space around the unit to permit access for maintenance. See
the outline drawing for recommended maintenance space.

•

Choose a location where it can be easily operated.

1.3.2

Desktop, overhead mounting

1. Fasten the hanger to the mounting location with four tapping screws

(supplied). See the outline drawing for mounting dimensions.

2.  Screw the knobs into the display unit.
3.  Set display unit to the hanger and tighten the knobs.
4.  Run the ground wire between the ground terminal on the display unit and the

ship’s superstructure.

Desktop

Overhead

Desktop and overhead mounting

Содержание SC-50S


































































Результаты поиска

Содержание SC-50S

Отзывы:

Похожие инструкции для SC-50S

Бренды по названию

Популярные бренды

Furuno SC-50S, Руководство оператора

Результаты поиска

Содержание SC-50S

Отзывы:

Похожие инструкции для SC-50S

Бренды по названию

Популярные бренды