Furuno FR-10, Руководство оператора

Страница: 156 / 171

APPENDIX 5 ALERT LIST
AP-20
107 NO POSITION SIGNAL SIGNAL MISSING Positioning signal input has
stopped or was interrupted.
108 NO COG/SOG SIGNAL SIGNAL MISSING COG/SOG signal input has
stopped or was interrupted.
109 RP COM ERROR SIGNAL MISSING (Only appears for systems which
have, or had, a RP board connect-
ed at any time) Communication
between the antenna unit and pro-
cessor unit has stopped or was in-
terrupted.
110 HDG ON LAN SIGNAL MISSING Processor unit’s calculated head-
ing is accurate, but the signal sent
to the antenna is invalid.
201 TARGET ALARM 1 IN One or more targets were detect-
ed entering the alarm zone.
301 TARGET ALARM 2 IN
202 TARGET ALARM 1 OUT One or more targets were detect-
ed leaving the alarm zone.
302 TARGET ALARM 2 OUT
401 PROXIMITY TT ALARM TT/AIS target is closer than the
set threshold.
501 AIS ALARM
402 RISK VISUALIZER ALERT TT ALARM TT/AIS target has entered the
Risk Visualizer alert zone.
502 AIS ALARM
403 TT DANGER OF COLLISION TT ALARM A TT/AIS target is on a possible
collision course with your vessel.
503 AIS DANGER OF COLLISION AIS ALARM
404 TT TARGET LOST TT ALARM A TT/AIS has been lost and can-
not be tracked.
504 AIS TARGET LOST AIS ALARM
505 AIS DISPLAY FULL AIS ALARM Maximum number of displayable
AIS targets has been reached.
506 AIS COM ERROR AIS ALARM Communication with the AIS tran-
sponder is interrupted or stopped.
603 LAN NETWORK ERROR OTHER Duplicate IP addresses detected.
604 HIGH TEMP OTHER Processor unit has abnormally
high internal temperature.
605 RP HW ERROR OTHER An error has occurred on the RP
Board and requires a system re-
start.
606 CHART MEMORY ERROR OTHER Chart was not read due to an er-
ror.
607 DATA R/W/D ERROR OTHER Failed to read/write/delete the se-
lected data.
Alert ID Alert Type Alert Message Description