Furuno FR-10, Руководство оператора

Страница: 66 / 171

2. OPERATION
2-30
4. Select [Zoom], then press the ENTER key.
5. Select [On], then press the ENTER key.
The ZOOM indication appears at the upper-left corner on the screen. The zoom
window and the zoom cursor also appear (see the illustration on the next page).
To quit the zoom, select [Off] instead of [On], then press the
ENTER key.
6. Press the MENU key to close the menu.
Target (AIS, TT) zoom mode
The TT or AIS target as below can be displayed in the zoom window:
• TT: The symbol is enlarged twice its normal size.
• AIS: The symbol is enclosed in a broken square. (The symbol is not enlarged.)
The zoom cursor moves with the TT or AIS target.
Note: If neither TT nor AIS targets are selected, the message "NO TARGET." ap-
pears. Press any key to erase the message.
1. Press the MENU key to open the menu.
2. Press  or  to select [Display], then press the ENTER key.
3. Press  or  to select [Zoom], then press the ENTER key.
1.5 1.5
NM NM
Zoom window
+
Zoom cursor
2 5 5 . 5 R 1 . 0 9 4 N M
V E C T T R U E 0 5 : 0 0
+